Help
Editing Step 3 —

Step Type:

Drag to rearrange

Place the TinyNES on a flat work surface. Make sure that nothing (including cables, controllers, or a cartridge) is connected to it. If the Cartridge Latch accessory is installed, please remove it first.

Remove the 8 marked M2.5 x 10 mm flat head machine screws from the top panel. Put the screws aside, being careful not to lose them.

Lift the top panel off of the enclosure and put it aside.

Do not touch any of the exposed chips on the main board with your fingertips. Static electricity discharge can cause invisible damage to these sensitive components.

If the white plastic cartridge guide comes off with the top panel, remove it from the top panel and reposition it around the cartridge connector as shown.

Your contributions are licensed under the open source Creative Commons license.