TinyNES Jumper Board Kit Installation Step #2 History

Changes to Step #2

Edit by Daniel Gilbert — Jul 9, 2023

	[title] Check the new parts
	[* 1] Make sure that you have both of the new necessary parts, and that they're both undamaged.
	[* 3] The first part is the *jumper board spacer* which is made of solid white plastic.
	[* 5] The second part is the *assembled jumper board, which should be marked with part number TD-TDMY-A* and have 3 sets of 1x3 pin headers installed on it.
	[* 10] Please note that the jumper board you receive may be either *green* or *black, and it may have a different date* on it than the one pictured here.
-	[* 9] Check to make sure that none of the pins on the jumper board are bent. If any of them are slightly bent, you can attempt to bend them back into position with a pair of small pliers. If any of them are damaged, please [link\|mailto:support@tall-dog.com\|contact us] for a replacement.
+	[* 9] *Check to make sure that none of the pins on the jumper board are bent.* If any of them are slightly bent, you can attempt to bend them back into position with a pair of small pliers. If any of them are damaged, please [link\|mailto:support@tall-dog.com\|contact us] for a replacement.

	[title] Check the new parts
	[* 1] Make sure that you have both of the new necessary parts, and that they're both undamaged.
	[* 3] The first part is the *jumper board spacer* which is made of solid white plastic.
	[* 5] The second part is the *assembled jumper board, which should be marked with part number TD-TDMY-A* and have 3 sets of 1x3 pin headers installed on it.
	[* 10] Please note that the jumper board you receive may be either *green* or *black, and it may have a different date* on it than the one pictured here.
-	[* 9] Check to make sure that none of the pins on the jumper board are bent. If any of them are slightly bent, you can attempt to bend them back into position with a pair of small pliers. If any of them are damaged, please [link\|mailto:support@tall-dog.com\|contact us] for a replacement.
+	[* 9] *Check to make sure that none of the pins on the jumper board are bent.* If any of them are slightly bent, you can attempt to bend them back into position with a pair of small pliers. If any of them are damaged, please [link\|mailto:support@tall-dog.com\|contact us] for a replacement.