Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

+[title] Remove the Assembly Template and Spacer
+[* green] Remove the two ***M2.5 × 6 mm pan head machine screws*** from the Control Board side of the assembly and put them aside for the next iteration.
+[* black] Gently lift the Control Board away from the Assembly Template and the Assembly Spacer. They should both slide off easily without applying much force.
+[* black] Inspect the Control Board assembly and verify that all of the following statements are ***true***:
+ [* light_blue] There are ***no gaps*** between the plastic bases of components ***J1-12*** and the top surface of the Control Board.
+ [* blue] The shafts of components ***P1-7*** and ***S2-3*** rise ***perpendicularly*** (at a 90º angle) compared to the top surface of the Control Board.
+ [* violet] The ***spacer*** beneath component ***S1*** is seated ***flush*** against the top surface of the Control Board.
+[* black] This completes the process.
+[* icon_note] Leave the two standoffs attached to the Assembly Template and skip Step 1 on the next iteration of this process.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added