Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

[title] Place the Control Board components
[* black] Identify the Control Board assembly. It has part number ***TD-UCSE-D-CB*** printed on its bottom side.
- [* icon_note] For ease of access to the solder pads, it is highly recommended to solder through-hole components ***H1***, ***H2***, ***H3***, and ***H4*** before continuing this process.
+[* yellow] For ease of access to the solder pads, place and solder the four through-hole components ***H1-4*** before continuing this process.
[* icon_caution] Do not solder any of the following components yet.
-[* red] Place the ***PCB spacer*** onto component ***S1***, then place component ***S1*** onto the board.
-[* orange] Place the spacer components ***DS1-4*** onto components ***D1-4***, then place components ***D1-4*** onto the board.
+[* red] Place the ***spacer*** onto switch component ***S1***.
+[* orange] Place the combined ***spacer and switch*** onto the Control Board.
+[* green] Place the four spacer components ***DS1-4*** onto LED components ***D1-4***.
+[* light_blue] Place the four combined ***spacers and LEDs*** onto the Control Board.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added