Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

[title] Prepare the Assembly Template
[* icon_note] ***This step only needs to be done once.*** The standoffs can remain attached to the template permanently for subsequent iterations.
-[* black] Identify the green Assembly Template. It has the part number TD-UCSE-D-AT printed on it.
+[* black] Identify the green Assembly Template. It has the part number ***TD-UCSE-D-AT*** printed on it.
[* red] Note the orientation of the board. The standoffs will be installed on the side that has ***THIS SIDE FACES DOWN*** printed on it.
[* orange] Locate two ***M2.5 × 10 mm female standoffs***.
[* green] Secure each standoff using one ***M2.5 × 6 mm pan head machine screw*** in each of the two locations shown.
[* black] Flip over the completed Assembly Template. It is now ready to be used.