Changes to Step #6
Edit by Daniel Gilbert —
Edit approved by Daniel Gilbert
- Before
- After
- Unchanged
Step Lines
[title] Remove the Assembly Template and Spacer | |
[* green] Remove the three ***M2.5 × 6 mm pan head machine screws*** from the Main Board side of the assembly and put them aside for the next iteration. | |
[* black] Gently lift the Main Board away from the Assembly Template and the Assembly Spacer. They should both slide off easily without applying much force. | |
[* black] Inspect the Main Board assembly and verify that both of the following statements are ***true***: | |
[* light_blue] There are ***no gaps*** between the plastic bases of components ***J1-12*** and the top surface of the Main Board. | |
[* blue] The shafts of components ***S1-4*** rise ***perpendicularly*** (at a 90º angle) compared to the top surface of the Main Board. | |
[* black] This completes the process. | |
- | [* icon_note] Leave the three standoffs attached to the Assembly Template |
+ | [* icon_note] Leave the three standoffs attached to the Assembly Template and skip Step 1 on the next iteration of this process. |