µo_C SE Assembly Template Instructions Step #3 History

Changes to Step #3

Edit by Daniel Gilbert — Jul 7, 2021

	[title] Place the Assembly Spacer
	[* black] Locate the white plastic Assembly Spacer part.
-	[* icon_note] Make sure that the *flat side* of the Assembly Spacer is *facing up* when orienting it relative to the ~~board~~.
+	[* icon_note] Make sure that the *flat side* of the Assembly Spacer is *facing up* when orienting it relative to the Main Board.
	[* black] Position the Assembly Spacer above the four components *S1-4* and slide it down onto them.
-	[* black] The Assembly Spacer should rest on top of the four components with *no gaps. All four component shafts should be ~~extending~~ through* the Assembly Spacer, as shown.
+	[* black] The Assembly Spacer should rest on top of the four components with *no gaps. All four component shafts should be extending upwards through* the Assembly Spacer as shown.

	[title] Place the Assembly Spacer
	[* black] Locate the white plastic Assembly Spacer part.
-	[* icon_note] Make sure that the *flat side* of the Assembly Spacer is *facing up* when orienting it relative to the ~~board~~.
+	[* icon_note] Make sure that the *flat side* of the Assembly Spacer is *facing up* when orienting it relative to the Main Board.
	[* black] Position the Assembly Spacer above the four components *S1-4* and slide it down onto them.
-	[* black] The Assembly Spacer should rest on top of the four components with *no gaps. All four component shafts should be ~~extending~~ through* the Assembly Spacer, as shown.
+	[* black] The Assembly Spacer should rest on top of the four components with *no gaps. All four component shafts should be extending upwards through* the Assembly Spacer as shown.