Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

[title] Place the Assembly Spacer
[* black] Locate the white plastic Assembly Spacer part.
- [* icon_note] Make sure that the flat side of the Assembly Spacer is facing up when orienting it relative to the board.
-[* black] Position the Assembly Spacer above the four components S1-4 and slide it down onto them.
-[* black] The Assembly Spacer should rest on top of the four components with no gaps. All four component shafts should be extending upwards through the Assembly Spacer, as shown.
+ [* icon_note] Make sure that the ***flat side*** of the Assembly Spacer is ***facing up*** when orienting it relative to the board.
+[* black] Position the Assembly Spacer above the four components ***S1-4*** and slide it down onto them.
+[* black] The Assembly Spacer should rest on top of the four components with ***no gaps***. All four component shafts should be ***extending through*** the Assembly Spacer, as shown.