Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

[title] Turn the mask inside out
[* black] Carefully '''turn the mask inside out'''. The stiffness of the interface material might make this a little difficult. Go slowly.
[* icon_caution] Be especially careful '''not to tear the interface material''' while doing this, especially at the two inner sharp angles (marked with arrows).
[* black] '''Flatten the mask'''. Run your fingers along the inside of the seam to push it all the way out, then press the seam down from the outside to flatten it.
[* black] '''Flatten the mask'''. Run your fingers along the inside of the seam to push it all the way out, then press the seam down from the outside to flatten it.
[* icon_note] You probably won't need to iron the flattened seam, as long as the interface material that you're using has enough stiffness.