Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

[title] Turn the mask inside out
-[* black] Insert wisdom here.
+[* black] Carefully ***turn the mask inside out***. The stiffness of the interface material might make this a little difficult. Go slowly.
+ [* icon_caution] Be especially careful ***not to tear the interface material*** while doing this, especially at the two inner sharp angles (marked with arrows).
+[* black] ***Flatten the mask***. Run your fingers along the inside of the seam to push it all the way out, then press the seam down from the outside to flatten it.
+ [* icon_note] You probably won't need to iron the flattened seam, as long as the interface material you're using has enough stiffness.

Image 1

Old Version

New Version