Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

[title] Cut the fabric and interface material
[* black] Stack the sheet material in the following order, listed from the bottom up:
[* red] One sheet of '''interface material'''.
[* orange] One sheet of '''cotton fabric''', with the outside '''facing up'''.
[* orange] One sheet of '''cotton fabric''', with the outside '''facing down'''.
[* black] Stack the sheet material in the following order, listed from the bottom up:
[* red] One sheet of '''interface material'''.
[* orange] One sheet of '''cotton fabric''', with the outside '''facing up'''.
[* orange] One sheet of '''cotton fabric''', with the outside '''facing down'''.
[* red] One sheet of '''interface material'''.
[* orange] One sheet of '''cotton fabric''', with the front side '''facing up'''.
[* orange] The second sheet of '''cotton fabric''', with the front side '''facing down'''.
[* red] The second sheet of '''interface material'''.
[* yellow] The cut out '''pattern''', facing up.
[* icon_note] The orientation of the fabric only matters if you're using a printed fabric that has a distinct front and back. In this stack, the front sides should be facing'''facing each otherother'''. I'm using plain fabric with no particular orientation, so both sides are the same.
[* green] '''Insert pins''' through all the layers of the stack. Make sure there are no wrinkles or bunches, and that the pattern does not extend past any of the edges
.
[* icon_note] The orientation of the fabric only matters if you're using a printed fabric that has a distinct front and back. In this stack, the front sides should be facing'''facing each otherother'''. I'm using plain fabric with no particular orientation, so both sides are the same.
[* green] '''Insert pins''' through all the layers of the stack. Make sure there are no wrinkles or bunches, and that the pattern does not extend past any of the edges
.

Image 3

Old Version

New Version