Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

+[title] Insert and pin the straps
+[* black] ***Remove an existing pin*** if necessary to make room, and place one of the 12" (30 cm) elastic straps ***between the two layers of cotton fabric***.
+ [* icon_caution] Make sure the elastic straps are inserted between the correct layers!
+[* black] ***Position the strap*** so that it runs between one of the upper points that you just marked and the top of the V-shaped cutout.
+[* black] Leave about ***1/4" (6 mm) of the elastic extending*** beyond the curved edge.
+[* black] ***Insert a pin*** through the elastic to hold it in place, as shown.
+[* red] Making sure there are no twists in the elastic strap, ***position the other end similarly*** on the opposite side of the mask, and pin it in place.
+[* orange] ***Repeat this process*** for the lower strap. Angle each side so that it runs toward the closest shallow bottom point.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added