Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged

Step Lines

[title] Transfer the straight lines
-[* black] ***Place the mask on top of the pattern*** again, aligning the bottom edges.
-[* red] ***Mark a point on the mask*** that's about 1/4" (6 mm) above the center of the acute angle cutout point.
-[* orange] ***Draw straight lines*** connecting that point to the two marks along the curve that you made earlier.
-[* yellow] ***Make two new marks*** along the curve where the other dashed lines on the pattern intersect with the mask.
-[* green] ***Draw two more straight lines*** connecting these two points to points about 1/8" (3 mm) above the obtuse angle points along the bottom edge of the mask, as pictured.
+[* red] ***Mark a point on the mask*** that's about 1/4" (6 mm) above the center of the V-shaped cutout.
+[* orange] ***Draw two straight lines*** connecting that point to the two points where the upper strap connects to the mask.
+[* yellow] ***Draw two more straight lines*** connecting the two points where the lower strap connects to the mask to points about 1/8" (3 mm) above the shallow angles along the bottom edge of the mask, as pictured.

Image 1

Old Version

New Version

Image 2

Deleted

Image 3

Deleted