Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Teensy 4.0 Breakout Assembly Guide Introduction

Edit by Daniel Gilbert

Edit approved by Daniel Gilbert

Before
After
Unchanged
Category
Root
Type
how-to
Title
Teensy 4.0 Breakout Assembly Guide
Time Required Min
No estimate
Time Required Max
No estimate
Imageid
Before
After
Difficulty
Moderate
Author
Public
No
Featured Documentid

Tools

  • Soldering iron x1 added.
  • Solder and flux x1 added.
  • Breadboard x1 added.
  • Diagonal cutters x1 added.
  • Blue tape x1 added.
  • Razor blade x1 added.
  • PCB holder x1 added.

Parts

  • Pre-assembled PCB (TD-T40B-A4) x1 added.
  • Flex Cable (TD-T40F-A2) x1 added.
  • Male Pin Header (1×40 TH) x3 added.
  • Male Pin Header (2×5 SMD) x1 added.
  • Male Pin Header (2×2 TH) x1 added.
  • Slide Switch (SS12D00G3) x2 added.
  • Jumper / Shunt x2 added.
  • Machine Screw (M2 × 4mm) x4 added.
  • Female Standoff (M2 × 6mm) x4 added.
  • USB-A Jack x1 added.
  • Battery Holder (⌀ 12 mm) x1 added.
  • Coin Cell Battery (CR1220) x1 added.
  • 4.7 kΩ Resistor (0805) x9 added.

Flags

  • In Progress added.

Documents

  • Datasheet added.