Parts
- Pre-assembled PCB (TD-T40B-A4)
- Flex Cable (TD-T40F-A2)
- Male Pin Header (1×40 TH) × 3
- Male Pin Header (2×5 SMD)
- Male Pin Header (2×2 TH)
- Slide Switch (SS12D00G3) × 2
- Jumper / Shunt × 2
- Machine Screw (M2 × 4mm) × 4
- Female Standoff (M2 × 6mm) × 4
- USB-A Jack
- Battery Holder (⌀ 12 mm)
- Coin Cell Battery (CR1220)
- 4.7 kΩ Resistor (0805) × 9
-
-
Please check back shortly for the complete assembly instructions.
-
Almost done!
Finish Line
Cancel: I did not complete this guide.
One other person completed this guide.
Attached Documents
