Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. Identify the green Assembly Template PCB. It has the part number TD-OCSE-D-AR printed on it. Notice the orientation of the board. Standoffs will be installed on the side that says "THIS SIDE FACES DOWN." Locate three M2.5 × 10 mm standoffs.
    • Identify the green Assembly Template PCB. It has the part number TD-OCSE-D-AR printed on it.

    • Notice the orientation of the board. Standoffs will be installed on the side that says "THIS SIDE FACES DOWN."

    • Locate three M2.5 × 10 mm standoffs.

    • Secure each standoff with an M2.5 × 6 mm pan head machine screw.

Daniel Gilbert

Member since: 12/7/19

2,103 Reputation

9 Guides authored